summaryrefslogtreecommitdiff
path: root/Makefile
AgeCommit message (Collapse)Author
2014-12-23git: use xz compressed archive for downloadChristian Hesse
2014-12-23git: update to v2.2.1Christian Hesse
Update to git version v2.2.1, including API changes. Signed-off-by: Christian Hesse <mail@eworm.de>
2014-08-07git: update to v2.0.4John Keeping
No CGit changes required. Signed-off-by: John Keeping <john@keeping.me.uk>
2014-07-28git: update to v2.0.3John Keeping
This is slightly more involved than just bumping the version number because it pulls in a change to convert the commit buffer to a slab, removing the "buffer" field from "struct commit". All sites that access "commit->buffer" have been changed to use the new functions provided for this purpose. Signed-off-by: John Keeping <john@keeping.me.uk>
2014-06-30Bump version.Jason A. Donenfeld
2014-06-28git: update to 2.0.1Christian Hesse
Everything works just bumping the version in Makefile and commit hash in submodule. No code changes required.
2014-06-28git: update for git 2.0Christian Hesse
prefixcmp() and suffixcmp() have been remove, functionality is now provided by starts_with() and ends_with(). Retrurn values have been changed, so instead of just renaming we have to fix logic. Everything else looks just fine.
2014-04-12git: update to 1.9.2Christian Hesse
Everything works just bumping the version in Makefile and commit hash in submodule. No code changes required.
2014-03-20Makefile: use more reliable git tarball mirrorJason A. Donenfeld
2014-03-20git: update to 1.9.1Christian Hesse
Everything works just bumping the version in Makefile and commit hash in submodule. No code changes required.
2014-02-28Bump version.Jason A. Donenfeld
2014-02-21git: Update to 1.9.0Lukas Fleischer
No code changes required, just bump the submodule and Makefile versions. Signed-off-by: Lukas Fleischer <cgit@cryptocrack.de>
2014-01-19cache: use sendfile() instead of a pair of read() + write()Sebastian Andrzej Siewior
sendfile() does the same job and avoids to copy the content into userland and back. One has to define NO_SENDFILE in case the OS (kernel / libc) does not supported. It is disabled by default on non-linux environemnts. According to the glibc, sendfile64() was added in Linux 2.4 (so it has been there for a while) but after browsing over the mapage of FreeBSD's I noticed that the prototype is little different. Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
2014-01-17makefile: bump versionJason A. Donenfeld
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2014-01-08git: update to 1.8.5Christian Hesse
Everything works just bumping the version in Makefile and commit hash in submodule. No code changes required. Signed-off-by: Lukas Fleischer <cgit@cryptocrack.de>
2013-08-26git: update to 1.8.4John Keeping
No code changes required, just bump the submodule and makefile versions. Signed-off-by: John Keeping <john@keeping.me.uk>
2013-08-12Makefile: Change default prefix to "/usr/local"Lukas Fleischer
Locally installed packages are usually installed to /usr/local. Packagers can use `make prefix=/usr` to get back the old behavior. Signed-off-by: Lukas Fleischer <cgit@cryptocrack.de>
2013-08-12robots.txt: disallow access to snapshotsJason A. Donenfeld
My dmesg is filled with the oom killer bringing down processes while the Bingbot downloads every snapshot for every commit of the Linux kernel in tar.xz format. Sure, I should be running with memory limits, and now I'm using cgroups, but a more general solution is to prevent crawlers from wasting resources like that in the first place. Suggested-by: Natanael Copa <ncopa@alpinelinux.org> Suggested-by: Julius Plenz <plenz@cis.fu-berlin.de> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2013-05-31Add faviconChristian Hesse
This adds a favicon to cgit. It is not enabled by default, though. The file contains two icons, 16x16 and 32x32 pixels, optimized for size.
2013-05-27CGIT-0.9.2Jason A. Donenfeld
Features: - update to git v1.8.3. - expanded set of default filters to include markdown, restructuredtext, and man pages. - better sample configuration file in man page. - "readme" may now be specified multiple times, and cgit will choose the first one it finds. - "readme" no longer needs a branch name. If prefixed with simply ":" it will use the default branch. - "branch-sort" allowing branches to be sorted either by "age" or "name", for kernel.org. - "enable-index-owner" allowing the owner column to be disabled in the index page. - print submodule revision next to submodule link. - integrate more closely with git apis, such as strbuf. - rely on git test harness and git makefiles. - more robust test suite. - more rebust makefile dependency accounting. - pager navigation is now unordered list. - span tag wraps commit directions. Behavior changes: - HOME is no longer passed as an environment variable to any filter api scripts. - "about-filter" now receives the filename being filtered as argv[1]. This may disrupt existing scripts, so adjust accordingly. - gitconfig and gitattributes are no longer loaded from any system directories or home directories. Security: - CVE-2013-2117: disallow directory traversal when readme is set to filesystem path. Bug fixes: - ssdiff now correctly manages tab expansion. - support unannotated tags in http git clone. - lots of cleanups of global variables and memory leaks. - do not rely on gettext/libintl. - better C standard compliance. - make several functions and variables static. - improved constification. - remove unused functions. - fix colspan values to correct width. - fix out-of-bounds memory accesses with virtual_root="". - cache repo config more precisely. - die when write fails. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2013-05-27filters: import more modern scriptsJason A. Donenfeld
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2013-05-25git: update to 1.8.3John Keeping
No changes required, just bump the submodule and Makefile versions. Signed-off-by: John Keeping <john@keeping.me.uk>
2013-05-22Makefile: fix parallel "make test"John Keeping
When building the "test" target we depend on both cgit and building the Git tools. By doing this with two targets we end up running make in the git/ directory twice, concurrently if using parallel make, which causes us to build more than we need and potentially builds incorrectly if multi-step build-then-move operations overlap. Fix this by instead calling back into the makefile so that we alter the "cgit" target to also build the Git tools. Signed-off-by: John Keeping <john@keeping.me.uk>
2013-04-27git: update to 1.8.2.2John Keeping
No changes required, just bump the submodule and Makefile version. Signed-off-by: John Keeping <john@keeping.me.uk>
2013-04-08tests: use Git's test frameworkJohn Keeping
This allows tests to run in parallel as well as letting us use "prove" or another TAP harness to run the tests. Git's test framework requires Git to be fully built before letting any tests run, so add a new target to the top-level Makefile which builds all of Git instead of just libgit.a and make the "test" target depend on that. Signed-off-by: John Keeping <john@keeping.me.uk>
2013-04-08Update git to v1.8.2.1John Keeping
This requires a small change to how we handle notes, but otherwise just works. Note that we can't use anything from v1.8.0 until v1.8.2.1 because some of the symbols that we need for graph drawing were made private in v1.8.0 and this was not reverted until v1.8.2.1. Signed-off-by: John Keeping <john@keeping.me.uk>
2013-03-20Makefile: remove CGIT-CFLAGS files in clean stageJason A. Donenfeld
2013-03-20Makefile: re-use Git's Makefile where possibleJohn Keeping
Git does quite a lot of platform-specific detection in its Makefile, which can result in it defining preprocessor variables that are used in its header files. If CGit does not define the same variables it can result in different sizes of some structures in different places in the same application. For example, on Solaris Git uses it's "compat" regex library which has a different sized regex_t structure than that available in the platform regex.h. This has a knock-on effect on the size of "struct rev_info" and leads to hard to diagnose runtime issues. In order to avoid all of this, introduce a "cgit.mk" file that includes Git's Makefile and make all of the existing logic apply to CGit's objects as well. This is slightly complicated because Git's Makefile must run in Git's directory, so all references to CGit files need to be prefixed with "../". In addition, OBJECTS is a simply expanded variable in Git's Makefile so we cannot just add our objects to it. Instead we must copy the two applicable rules into "cgit.mk". This has the advantage that we can split CGit-specific CFLAGS from Git's CFLAGS and hence avoid rebuilding all of Git whenever a CGit-specific value changes. Signed-off-by: John Keeping <john@keeping.me.uk> Acked-by: Jamie Couture <jamie.couture@gmail.com>
2013-03-04Makefile: Disable gettext in the Git submoduleLukas Fleischer
Newer libgit versions depend on the libintl library. However, we currently do not link against libintl which breaks compilation under OpenBSD: git/libgit.a(commit.o)(.text+0x1d1b): In function `lookup_commit_or_die': git/gettext.h:47: undefined reference to `libintl_gettext' [...] Since we do not support i18n in cgit, just disable gettext in the Git submodule to fix this. Signed-off-by: Lukas Fleischer <cgit@cryptocrack.de>
2013-03-04Makefile: improve dependency generationJamie Couture
Makefile target generation would always be included for any makefile target that was not clean. Only care to include the '.deps' directory when building cgit, rather than generating and including dependencies when calling other makefile targets. Heavily borrowed from git's Makefile, but without definitions to test for the compiler's header dependency feature. Previous Makefile implementation never checked for this compiler feature anyway. - Removed makecmdgoal 'clean' check - Grouped like .PHONY target definitions - Place build dependency targets under .SUFFIXES - Re-arranged location of library inclusion definitions - Use google code mirror instead of github Signed-off-by: Jamie Couture <jamie.couture@gmail.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2012-11-15CGIT-0.9.1Jason A. Donenfeld
Enhancements: - path-selected submodule links - intelligent default branch guessing - /etc/mime.types lookup - gitweb.* and cgit.* git-config support - case insensitive sorting and age sorting - commit, repository, and section sorting - bold currently viewed page in pagination - support BSDs in makefile Security: - CVE-2012-4465: heap-buffer overflow in parsing.c - CVE-2012-4548: syntax highlighting command injection Bug Fixes: - transition maintainer to Jason Donenfeld (zx2c4) - download git snapshot from github instead of Lars' old server - css fixes - stablization of tests - more compatible default highlight script - suppress gzip timestamp so that tarballs only use tar timestamps - treat ctags as target in makefile - do not let global variables override certain local repo settings - print ampersand as proper html entity - use placeholder for empty commit subject - format diff view for addition and removal of files - point links at correct blob from ssdiff Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2012-11-04Makefile: get snapshots from githubFerry Huberts
Github will have more bandwidth than Lars' server.
2012-10-31Makefile: remove tags fileJamie Couture
Remove tags file from working directory. Signed-off-by: Jamie Couture <jamie.couture@gmail.com>
2012-10-17Makefile: Support OpenBSD just like FreeBSDJason A. Donenfeld
2012-10-17Makefile: support FreeBSD libiconv pathsJason A. Donenfeld
According to Dan Rue <drue@therub.org>, FreeBSD requires the lib paths to get libiconv from /usr/local.
2012-10-08Makefile: add tag target to generate ctagsJamie Couture
Signed-off-by: Jamie Couture <jamie.couture@gmail.com>
2012-03-18Merge branch 'stable'Lars Hjemli
2012-03-18CGIT-0.9.0.3Lars Hjemli
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
2012-01-03Merge branch 'stable'Lars Hjemli
2012-01-03Makefile: fetch git tarballs from http://hjemli.net/git/git/Lars Hjemli
The git tarballs are currently not available from kernel.org, so for now the makefile will download autogenerated tarballs from cgit. Signed-off-by: Lars Hjemli <hjemli@gmail.com>
2011-07-21Merge branch 'stable'Lars Hjemli
2011-07-21CGIT 0.9.0.2Lars Hjemli
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
2011-07-19Makefile: fix oversight of not using $(DESTDIR) in uninstallFerry Huberts
Signed-off-by: Ferry Huberts <ferry.huberts@pelagic.nl> Signed-off-by: Lars Hjemli <hjemli@gmail.com>
2011-06-13CGIT 0.9.0.1Lars Hjemli
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
2011-03-05CGIT 0.9Lars Hjemli
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
2011-03-05Merge branch 'stable'Lars Hjemli
2011-03-05CGIT 0.8.3.5Lars Hjemli
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
2011-02-19Makefile: Make `make get-git` work under OpenBSD.Lukas Fleischer
OpenBSD tar(1) defaults to read from "/dev/rst0" when not specifying an filename and thus fails to extract the Git sourcecode when not passing stdin as input file descriptor explicitly. Signed-off-by: Lars Hjemli <hjemli@gmail.com>
2011-02-19Merge branch 'lh/improve-range-search'Lars Hjemli
* lh/improve-range-search: html.c: use '+' to escape spaces in urls ui-log.c: improve handling of range-search argument Add vector utility functions
2011-02-19Use GIT-1.7.4Lars Hjemli
Signed-off-by: Lars Hjemli <hjemli@gmail.com>