ヒューズが溶断した場合は、原因を調べて修理し てから、必ず指定容量のヒューズと交換すること。 In the event of a blown fuse, investigate and fix the cause before being sure to replace it with a fuse of the specified capacity. 容量確認! Capacity confirmed! カバー類は、作業終了後確実に端子にかぶせるこ と。 Terminals must have covers securely fitted over them at the end of the work. ロック付きカプラの接続を外すときは、必ずロッ クを外してから作業すること。 Always remove the lock before disconnecting a locking coupler. カプラの接続を外すときは、カプラ本体を持って 外すこと。 When disconnecting a coupler, hold the coupler body then disconnect it. ワイヤハーネスは引っ張らないこと。 Do not pull the wire harness. カプラの接続前に端子の折れ曲りがないこと、端 子の出過ぎ、抜けがないことを確認する。 Before connecting a coupler, check that the terminals are not folded or warped, that they do not stick out too far, and that there are no faults.